With the rapid development of the advertising industry, the use of computer engraving machines is also undergoing changes. along withCustomized engraving machineThe increasing demand has led to the continuous development and growth of the computer engraving machine industry. Many users are confused when choosing products. So, how can we choose a satisfactory product from many brands? You can refer to the following points for selection!

1、 Technical indicators The performance and technical indicators of a carving machine are the most critical indicators for measuring a carving machine. The most important indicators are as follows:

1. Width
2. Accurate
3. Knife pressure
4. Speed
5. Hide
6. Control method
7. Stability of engraving operations (this is particularly important)

2、 Convenience of operation and use

There are no quantitative indicators in this regard, but for current engraving machines, the following points need to be noted:

1. It is best to have a LCD display< br> 2. Paper feeding should be convenient< br> 3. Various switch adjustment buttons should be located in convenient positions for operation< br> 4. It should be convenient to replace the blade or pen tip< br> 5. Software operation and humanization design

3、 Price

In fact, the price of a carving machine is related to its performance, width, quality, and even brand. Currently, carving machines range from around a thousand yuan to tens of thousands of yuan. However, users should pay attention to its cost-effectiveness, which is often referred to as "value for money" (but low prices do not necessarily mean high cost-effectiveness. Setting aside performance and only looking at price is meaningless. It should be determined based on their own situation, otherwise failure to meet the requirements for production will be considered scrap iron)< br>
4、 After sales service, warranty, and accessory supply

Due to the fact that engraving machines are primarily used for business purposes and have a large volume, the production process in China in the past decade has shown that computer engraving machines are relatively mature modern office integrated equipment with low failure rates, rapid development of the logistics industry, and extremely convenient transportation. Therefore, special attention should be paid to the following aspects:

In the long run, it is better to purchase from legitimate merchants, otherwise it will cause trouble for maintenance< br> 2. Do not buy carving machines from uncommon brands< br> 3. The repair ability of dealers should be evaluated and purchased from professional suppliers< br> 4. Obtain protection from the seller's service, otherwise in case of any problems, you will not be able to obtain the necessary protection< br>
5、 Other issues

1. Regardless of the after-sales service, we always encounter customers from some original manufacturers (who do not buy machines from us, but need to charge a certain technical fee to find our after-sales service, so they refuse to pay for it). The reasons are as follows: ① Unreasonable price reductions are too harsh, and merchants have almost no profit, so naturally they don't care. ② The businessman praised too much, and the performance of the machine itself could not meet the requirements. No amount of guidance would be useful Personality issues. ④ The merchant itself is not very professional< br> At present, as long as we look at the parameters of most domestic engraving machines on the market, they are really just parameters. Blindly labeling and boasting is too much. If you have used domestic and imported machines, after comparing them, you will naturally understand. I believe that both customers who have used it should have a deep understanding of this< br>

In short, existence is rationality, that is, the market. It is not advisable to negotiate prices or budgets without considering performance< a href=" http://www.yitucut.com/ " data-ke-src=" http://www.yitucut.com/ " target="_ Blank ">Customizing the engraving machineChoosing the most suitable one that meets your requirements is cost-effective.Customized engraving machineChoosing the most suitable one that meets one's requirements is cost-effective.